Low Voltage Drives
Frenic MEGA- Rating 0.4 Kw - 710 Kw
Heavy Duty High End Industrial Drive
- Overload durability: 200% for 3sec, 150% for 1Min
(HD model) /120% for 1 min (LD mode)
- Ideal for highly accurate control
- Fuji's Original Dynamic torque vector control
- Quick reaction to the functuation of Impact load
- Customize logic built in
- Ambient Temp: 50 Degree C
- 3 Analog inputs /2 Analog Outputs
- 9 Digital Inputs
- 2 Relay outputs/4 Transistor Outputs
Download Brochure
Frenic ACE- Rating - 0.4 Kw to 280 Kw
General Purpose Industrial Drive
- General purpose
- Overload durability: 200% for 0.5 sec, Inbuilt
RTU Modbus port
- 2 Analog inputs
- 7 Digital inputs (including FWD/REV)
- 2 Analog outputs
- 1 Relay output
- 2 Transistor outputs
- Customized logic built in
Download Brochure
Frenic New MINI-Rating 0.4 Kw - 15 Kw
Heavy Duty General Purpose
Industrial Drive
- High Starting Torque at 150%, 200%
overload for 0.5 Seconds
- Built in Braking Chopper
- Stable Operation at low speed
- Ambient Temp: 50 Degree C
- Built in PID Control Function
- Non Linear V/F Pattern
- Component Life Time forecast
Download Brochure
Frenic eHVAC-Rating 0.7 Kw - 45 Kw
Dedicated HVAC Driver
- Dedicated functionality for HVAC markets
- Fire mode (fan control), built-in PID/Cascade
operation (pump control), etc.
- Dedicated EMC filter as standard
- Built-in category C2/C3 EMC filter as standard,
- Comprehensive Communication Network -
Best in Class
- Built in MODBUS RTU, BAC Net METASYS N2
- Enhanced customized logic
- Mini PLC logic can be supported inside the Drive
Download Brochure
Frenic LIFT- Rating : 4.0 Kw - 37 Kw
Dedicated Drive for Lift Applications.
For PM Motors and Induction Motor
- Optimum Exclusive design for Passenger Elevators
- PMSM (Gearless) / IM Common drive
- 200% Overload capacity for 10 seconds
- High performance vector control
- PG feedback for IM close loop operation
- Maintenance functions / long design life
- Supports 48 V DC / 200 V AC single phase for ARD
operation
- Starting without Load Cell
- Creep less & short floor function
- Regeneration Feature also available
Download Brochure
Frenic HVAC-Rating0.75 Kw - 90 Kw
Dedicated Drive for HVAC Applications.
IP21 and IP55 Models.
- EMC filter (C2 Class)
- DC Choke built in as standard feature
- Slim Body, IP21 (Standard) Enclosures /
same dimension for IP55/IP2
1
- 4-PID Control
- Wet bulb temperature presumption
afunction
- Fire Mode (Force protection)
- Pickup Operation function
- Real time clock
- Torque Vector control
- Filter clogging prevention function
- Customize logic
- 2 Level Password function
- LCD Keypad
- Standard Communications: BAC net,
Modbus RTU, Metasys N2
Download Brochure
Frenic ACE LIFT- Rating : 0.4 Kw to 15 Kw
Dedicated Drive for Lifts . Used for Induction
Motors.
- 200% OL for 3 Sec, 150% OL for 60 Sec
- Ideal design for open loop elevator application
- 6 S – Curves for smooth operation of elevator
- Supports 200 V, single phase ARD operation as
standard feature
- External brake logic control by drive
- Output contactor control by digital output and
built in timer Function
- Customizable 4- point V/F pattern
- Braking resistor overload protection
- PTC input with threshold settable
Download Brochure
Frenic Solar
- True Maximum Power Point Tracking (MPPT)
function
- Modbus RS 485 in- built to communicate with
Remote Monitoring Systems
- Motor Protection features to select water level
detection and control circuit to prevent overflow.
- Low Out power signal function
- Dry Pump Detection
- Tank Level Detection
- Sleep function to safeguard the motor.
- Big step Detection in climate is possible for
smooth operation.
- Easy to operate, Programmed through Factory
Download Brochure